R Stone
R Stone

Ls Z not NA?

13 timer siden
Murat
Murat

How is no one talking about the way he said “ interesting.”??

13 timer siden
Bryan French
Bryan French

Put a car on there and throw stuff under the tire and see how far you can launch it

13 timer siden
East _YaBeezy408
East _YaBeezy408

I always wanted to be able to drift a em1 with a hot blonde passenger damn

13 timer siden
Olivier Lapointe
Olivier Lapointe

Just dig a hole and put it in. Its expensive but see it as an investment.

14 timer siden
Evan
Evan

i like carpenter jim but i want carpenter jim to invest in an impact driver lol. im glad its not just me wondering why wood is so expensive right now.

14 timer siden
Driveformer
Driveformer

Tried to find your little green machine and it’s not like 90 it’s over 200 hahaha

14 timer siden
Sparcsmi
Sparcsmi

Would really like to see if theres a way to slow down that brake, especially if the car ends up with clutch or trans issues getting it stuck in gear or you get too hyped then slam the brake on the poor thing.

14 timer siden
Dylan Nix
Dylan Nix

5:31 Well Donald, there’s this magical place called Asia where safety regulations are more like safety _suggestions_

15 timer siden
Dylan Nix
Dylan Nix

Justin’s fake accent fucking sent me, all your fab friends are hilarious

15 timer siden
Luke Browne
Luke Browne

Can you buy or use something to raise the ramps up after a car is on them?

15 timer siden
camperkl75
camperkl75

Rj with the peep game heat

15 timer siden
Henry Mateo 2
Henry Mateo 2

Get a respirator.

16 timer siden
Alex Star
Alex Star

AWESOME TO SEE THE SAFETY GLASSES!!! keep up the great work gentlemen!

16 timer siden
BarraMK3
BarraMK3

Our LED strapping light stopped working in 5 days.... awesome purchase though, I’m sure you’ll love it.

16 timer siden
Lee Nux
Lee Nux

put a key truck on the dyno plz

16 timer siden
Tommy E90
Tommy E90

drill screwing in screws stresses me, wheres the impact at?

17 timer siden
Moe 420
Moe 420

My boy drifted tf out that civic

17 timer siden
Kars Bosma
Kars Bosma

Damn e30's are sooo cool

17 timer siden
turtle toes
turtle toes

lol these guys over here dynoing the tacoma, i see you xD

17 timer siden
Harry Winter
Harry Winter

Dear Jim, Please do cool e30 content Fanks Your loving supporters

17 timer siden
56. Lex
56. Lex

“ a very aculate calculation “😂😂

18 timer siden
massbro12
massbro12

Would be sick if you can do some tuning vids on bmw inline 6 with your e30 and bryans m54

19 timer siden
benjamin weig
benjamin weig

Just put it in the ground already.

20 timer siden
josh012345
josh012345

You should put A 20ton Air jacks under each the of the ramps a little ways back then lift the car level once your on the ramps. but make it proper somehow. even brace them both together and use one in the center or something? would almost be the same as a 4 post

20 timer siden
Brandon Cortes
Brandon Cortes

Idk if this is a dumb question but is it possible to adjust the height/position of the rollers for lower cars or cars will smaller wheels like the e30?

20 timer siden
No one Important
No one Important

Jimmy have you ever thought about making a like touge car?

20 timer siden
Will
Will

Dj kinda starting to look like shia lebouf

21 time siden
Hot Canon29
Hot Canon29

I see u jimmy

21 time siden
Brandon Ponder
Brandon Ponder

Dyno the k truck

21 time siden
McArthur Motors
McArthur Motors

Those ramps you ordered were probably cheaper than that wood 😂

21 time siden
Sam Bonney
Sam Bonney

This dyno doesn’t have some sort brake for the rollers when going on and off? Maybe Jimmy hasn’t found that button yet, but if not that seems incredibly cheap and I hope the price reflected that.

22 timer siden
Jeep 3377
Jeep 3377

Honestly you should just leave the wood ones when you get the race ramps so the front end of your cars is a little higher

22 timer siden
Black River Garage
Black River Garage

iI would be nice to get morfab to make a jack system for the ramps! So the cars can stay level Like this so jimmy sees this!

22 timer siden
Jeep 3377
Jeep 3377

Ayyyy congrats to dj broo just watched fyeahs vid lmaoo

22 timer siden
cannedsedan
cannedsedan

I wanna see the 1.8t gti on it

23 timer siden
Phil Brown
Phil Brown

Jimmy where did you get your vans

23 timer siden
Rickard Lagerin
Rickard Lagerin

oh shoot, is today easter :O

23 timer siden
G2G Builds
G2G Builds

Jimbo, make a video on tip and tricks on how to tune...

Dag siden
Ezra Gutierrez
Ezra Gutierrez

At 7:45 I deadass freaked out of excitement for a split second thinking that transition was to them launching the kei truck out in the back

Dag siden
SuperDany
SuperDany

3:17 oh thanks Jimmy

Dag siden
Rafael Silva
Rafael Silva

I'm disappointed, jimmy who does a project like nissonda with such high quality and attention to detail, can't dig a hole to fit the Dyno... it just looks bad with all the wood and bandages, such an expensive tool with such a bad treatment, jimmy it's time to start taking bigger steps, go to the next level...

Dag siden
ZERO TO SIDEWAYS
ZERO TO SIDEWAYS

Angle is way better, happy you saw my comment

Dag siden
jeeplife
jeeplife

Coat the wood with bed liner gives it nice texture and durability

Dag siden
Miyamoto65
Miyamoto65

I will kill to see RJ dyno his little beetle. Lol

Dag siden
Michael Zahran
Michael Zahran

Just put the car up on the dyno like you normally would do with your aluminum ramps slider a low profile Jack in between the two aluminum ramps right in front of the car to lift the front end of the car then take the ramps off so you can drop the car wheels on a set of wooden blocks the car will be even you can get underneath the car to work on it and the ramps won't be in your way

Dag siden
Benabus The Third
Benabus The Third

Can you use a single roller? Should probably get some high volume fans for the front of your car too (Didn't notice if you have already)

Dag siden
BitoysGaming
BitoysGaming

Good thing there are no griefer here or else ur car have been blown out

Dag siden
Lachlan Gallett
Lachlan Gallett

Jimmy what happened to the mini trucks

Dag siden
ray dayan
ray dayan

Don't forget hearing protection while dynoing cars

Dag siden
Godzilla
Godzilla

Jimmy finished all this work while rubdick was still asleep ....

Dag siden
ツJaco
ツJaco

When the Car starts going on the dyno the sounds from it sounds like a fire truck siren

Dag siden
andy chapman
andy chapman

I just don't understand why you don't use the 4 post that you have like every other person that has on the floor dyno

Dag siden
Rocksteady 89
Rocksteady 89

If I'm being honest it was kinda getting stale watching you bring in cars, slam them, and drift, and push them into a corner. Rinse and repeat. Like most I'm here for the personalities, i assume. But it's definitely refreshing seeing new content, watching you genuinely excited to learn a new skill and seeing the gears turn. Who doesn't love Carpenter James? Glad to see new things happening. Keep it up!

Dag siden
Justin
Justin

Gonna want to level your cars to do pulls guy. Think- front/ rear sumps

Dag siden
MikeOrkid
MikeOrkid

Everything looks awesome! I'd probably recommend lowering the eddy % on the dyno brake so it's not as abrupt. Maybe try 40% less than the current stop setting. Other than that, I'm stoked to see you get more in depth with it. Especially eddy runs.

Dag siden
Christian Fourie
Christian Fourie

Why don't you put a four post lift in front of the dyno ?

Dag siden
Arty Clutch
Arty Clutch

I forget what's in the e30, is it an m50 3ltr stroker or an e36 m3 engine?

Dag siden
John Van Der Beek
John Van Der Beek

Wuld like to see brians golf mk2 on it then you can see if frontwheel drive works on it aswell. hope the golf isnt to low tho

Dag siden
Callum Burton
Callum Burton

Good video dude 😃👍

Dag siden
Tactical Trampel
Tactical Trampel

Honestly I would try to throw a pair of quick jacks under those ramps so you can lift them up and make em straight once there is a car on the dyno

Dag siden
Impulses
Impulses

yo make sure ur PC can BREATH BRO

Dag siden
Chris Broadbridge
Chris Broadbridge

Please start a basic ass tuning series...I have access to a Dyno whenever I need it, but it's currently only used for flash re-map testing not tuning we have no idea where to begin!!!

Dag siden
ice_1990
ice_1990

I love to see how a front wheel drive car will act on the dyno jimmy

Dag siden
Arthur B
Arthur B

Jimmy : « the e30 is the only NA car here » The red Z : « brooo »

Dag siden
Hannu Miettinen
Hannu Miettinen

I hope you get the load controll working. I have the linked 4wd version of the same dyno and after few months of Daily computer crashes, fixing the handheld once or twice a month, and the steady state and load controll not working I got tired of it and upgraded go Sport Devices SP5 electronics. The load controll kinda worked with fixed load % but PID was utter garbage no matter what. It couldnt hold 2.0l NA engine steady! The run you did with E36 looked too familiar. Like it first overshoot the brake and then just gave up resulting in 3sec run instead of your set run length.

Dag siden
Ricardo Arnagiri
Ricardo Arnagiri

Jimmy should make a, '' Rambling'' Tee 😁

Dag siden
kieran odoherty
kieran odoherty

Could you dyno your your truck

Dag siden
Ben Meyer
Ben Meyer

that belle delphine shirt tho hahaha

Dag siden
Scotty B
Scotty B

Dyno vlog of all your cars on the dyno!

Dag siden
James G
James G

Try find some air-ride air bags and hook them up to a frame at the front under the ramps, then you can raise and lower with ease

Dag siden
Hue Mungus
Hue Mungus

Check the teflon rings on the vanos stuff before you go crazy with other stuff. these rings shrink over time and make the vanos go do do. Would explain the whole lean mixture at the end. greets

Dag siden
Hue Mungus
Hue Mungus

10:54 looks like your rear wheels are unbalanced? or look bend? Crazy set up Jimmy. Really cool seeing the huge progress.

Dag siden
Michael Cervoni
Michael Cervoni

Yo Jimmy I have the same power cord, the struggle is real!!

Dag siden
Phill Robinson
Phill Robinson

Might not be speaking for everyone but i like these videos its good to see you learn and it might inspire someone else to start doing it. Plus who doesn't love to see a car getting a pasting on the dyno

Dag siden
cqb mafia
cqb mafia

Why didn’t you put the dyno to a different bay and put a ramp to it ?

Dag siden
Kenneth Kashuba
Kenneth Kashuba

Again .... I dunno seems like you should fab a stand for the front wheels level to the ground ..... what do I know

Dag siden
Derick
Derick

Love this Chanel keep up the great content !!!!

Dag siden
Shona
Shona

I think Jimmy can just go ahead and cancel that order from Race Ramp now. These wooden ones will suffice. With a bit of paint and grip tape it will look legit. No need for the extra cost.

Dag siden