DjAyovi
DjAyovi

Vivan Japón y sus marcas. Magnífico vídeo, muchas gracias por la información, y por dedicar tu tiempo en ayudar. Saludos

9 timer siden
Jacob Joseph
Jacob Joseph

Is it possible to test leaf blowers/mulchers????

9 timer siden
santoso salvatore
santoso salvatore

We compare quality or compare price. If you want low price but get high quality are builshit. China makes things in two ways, namely for hobbies and for work

9 timer siden
Mack Jones
Mack Jones

I don't understand why Lenox and Freud do not make blades to fit oscilating saws. You would think that with their experience and quality with existing blade lines they would add to their product lineup and capitalize on this lucrative opportunity to sell blades.

9 timer siden
Bruce Lloyd
Bruce Lloyd

The horizontal pulling tests makes much more sense than the vertical test. In the real world, a heavy object like a big screen TV is going to pull the anchor straight out NOT down. The strongest anchors are going to have the most surface area on the BACK SIDE of the sheetrock. Unfortunately that requires drilling a bigger hole (1/2-inch) which weakens the sheetrock. Instead of just 1.5 inch x.25-inch horizontal bar on the backside, manufactures should make it 2.5-inch horizontal and vertical bar combo for massive strength on the back side of the sheetrock!

9 timer siden
Doug Kaspar
Doug Kaspar

I work at a hardware store and we sell very little flat sheen. It would be interesting to try the test with eggshell or satin. Also you didn't test anything from the Ben Moore family. Sherwin Williams now owns Valspar too.

9 timer siden
liam carbone
liam carbone

you should do a taste test

9 timer siden
These Truths
These Truths

My opinion: clean with seafoam or similar intake cleaner. Fill tank with 5 gallons of fuel, 15 bottles of cleaner (any kind or mix and match...doesn't matter), and then 5 gallons of fuel (for mixing's sake). Run car up to temp and drain oil and change filter. Instead of oil, refill with 50/50 transmission oil and marvel mystery oil. Run for 3,000 miles and change oil and filter. Engine will be clean. This is only if you have a really gunked up motor and the only alternative is physical rebuild.

9 timer siden
Ryan Tink
Ryan Tink

Can you review condoms! Which ones don't break and feel the best lol

9 timer siden
Mike Stone
Mike Stone

Your channel is one of the coolest on youtube 👍🏻. Thanks for all of your work.

9 timer siden
Kaden Johnson
Kaden Johnson

Hello! Could you please test different hardwood floor finishes like rejuvenate? Thanks for the awesome content as always!!

9 timer siden
FOXY10 -2018
FOXY10 -2018

Best video ever. This guy done so much work to make this video. Very informative.

9 timer siden
asioe kiou
asioe kiou

gloves. You found a way, like you always seem to do!

9 timer siden
Justin Purdy
Justin Purdy

I use Lucas heavy duty oil stabilizer in my oil every oil change and seafoam every 3rd oil change.

9 timer siden
Nathan Wilkins
Nathan Wilkins

How is it that you decided milwaukee is 'definitely' the toughest? None of those 3 suffered any damage, .milwaukee just happened to be the heaviest and most cumbersome Would have been more accurate

9 timer siden
Brady Knowz best
Brady Knowz best

You should test these new flex brand power tools . They claim to have a percentage more power then milwaukee and dewalt. They are also claiming their battery tech makes them last longer then same capacity milwaukee and dewalt batteries. Would be interesting to see that test. Maybe the batteries running a light

9 timer siden
llewellyn williams
llewellyn williams

slow down

9 timer siden
mshumai
mshumai

Dang...i see you Coleman!

10 timer siden
mshumai
mshumai

@Project Farm Wow you are on top of things. Glad I became a subscriber. My day job is doing biomedical research, and I ]appreciate your rigorous testing methodologies and practical approaches to testing products a lot of people use. Thanks to you I can make better informed buying decisions. Cheers!

9 timer siden
Project Farm
Project Farm

Thanks for watching!

9 timer siden
miles powell
miles powell

Keep up the great content! I was also wondering does any of these products effect pvc glue?

10 timer siden
Project Farm
Project Farm

Thanks! Thanks for the video idea.

9 timer siden
Lance McQue
Lance McQue

Even before finishing this video I know the answer. Japan wins all the time.

10 timer siden
Project Farm
Project Farm

Thanks for the feedback.

9 timer siden
Sean Frank
Sean Frank

Does anti-seize work? Yep. I use it quite frequently in my line of work.

10 timer siden
Project Farm
Project Farm

Thanks for the feedback.

9 timer siden
Trent Blum
Trent Blum

Ridgid is coming out with a battery operated grease pump. Just for future reference ;)

10 timer siden
Project Farm
Project Farm

Thanks for the video idea.

10 timer siden
Karla Muñoz
Karla Muñoz

Do I need gloves?.... not really. Did I watch this entire video?.... hell yeah!

10 timer siden
Project Farm
Project Farm

Thanks for watching!

10 timer siden
millionaire idealist
millionaire idealist

hi, can you please test xtreme green and pertua oil additive claims on youtube videos?

10 timer siden
Project Farm
Project Farm

Thanks for the video idea.

10 timer siden
Chri AAtor
Chri AAtor

Viscosity on the results is pretty sus. Ok imma head out.

10 timer siden
Edgardo Tanada
Edgardo Tanada

you can easily use a small visegrip in your presentation video

10 timer siden
Project Farm
Project Farm

Thanks for the feedback.

10 timer siden
Rusty Gold
Rusty Gold

Because China have boycotted a lot of Australian Industries in a trade war and causing us a lot of job losses and export dollars Im refusing to buy anything made in China . Hope some readers support us against Xi Xinpangs Trade War

10 timer siden
Edgardo Tanada
Edgardo Tanada

only an idiot will use an extractor with a lose extended screw

10 timer siden
John Connor
John Connor

Any of these good for plastics?

10 timer siden
Project Farm
Project Farm

Thanks for the video idea.

10 timer siden
Jay Finke
Jay Finke

The Florida pool pump motor repair guy approved ! that was good info farm man

10 timer siden
Project Farm
Project Farm

Thanks 👍

10 timer siden
Chri AAtor
Chri AAtor

5:21 Oh no no noo.... 😂

10 timer siden
bbulliard
bbulliard

Great video w lots of info

10 timer siden
Project Farm
Project Farm

Thanks!

10 timer siden
Edgardo Tanada
Edgardo Tanada

made in china is unreliable

10 timer siden
hardnacho puppy
hardnacho puppy

Have you ever received a request or threat from companies to remove a certain video?

10 timer siden
Edgardo Tanada
Edgardo Tanada

ur good

10 timer siden
Project Farm
Project Farm

Thanks!

10 timer siden
Alastair Sellars
Alastair Sellars

Can I assume that these saws had different sized chains on each of them? If so, then the test is problematic. Without running the same sized chains on each of the saws, then the testing outcomes of course will differ.

10 timer siden
Darwin
Darwin

Hi... You are tested the Hella Synthetic oil 5W30 ???

10 timer siden
Project Farm
Project Farm

Thanks for the suggestion.

10 timer siden
Darwin
Darwin

Hi... You are tested the Hella Synthetic oil 5W30 ???

10 timer siden
Farhan Munir
Farhan Munir

Review jet cleaner maybe next?

10 timer siden
Project Farm
Project Farm

Thanks for the video idea.

10 timer siden
Darwin
Darwin

Hi... You are tested the Hella Synthetic oil 5W30 ???

10 timer siden
Brandon Fairbanks
Brandon Fairbanks

Why not test different high octane fuels and additives on a high compression engine? That would be nice for guys who have high horsepower cars to have access to that information.

10 timer siden
Project Farm
Project Farm

Thanks for the video idea.

10 timer siden
pomer racer
pomer racer

kroil is hands down the best true experience

10 timer siden
Project Farm
Project Farm

Thanks for the feedback.

10 timer siden
Gaming Ninja51
Gaming Ninja51

As Marty McFly says "All the best stuff is made in Japan". Besides I'm tired of everything being made in china these days.

11 timer siden
Valik Toma
Valik Toma

JDM lol

11 timer siden
G Mc Innis
G Mc Innis

spin welded the rod to the crank. friction welding.

11 timer siden
David SMITH
David SMITH

Have you tested older oil bath air cleaners

11 timer siden
Project Farm
Project Farm

Thanks for the video idea.

10 timer siden
Bond James
Bond James

Using 2 different machines is not accurate.

11 timer siden
Luiz Miguel Alves
Luiz Miguel Alves

I used to buy Duracell, but after this video I'll buy Energizer. Thanks for the help man 👍

11 timer siden
Project Farm
Project Farm

You are welcome!

10 timer siden
TheThirdMan
TheThirdMan

They are _both_ Japanese. The difference is that one is locally made JDM and the other is outsourced. You don’t really think a company like Makita is going to put its name on a bad product, do you?

11 timer siden
Project Farm
Project Farm

Thanks for the feedback.

10 timer siden
Craig Richardson
Craig Richardson

Once again; an unbiased, eye opening valuable video and ALWAYS interesting/entertaining. And, I am going to change from the plugs I currently have in my 69 LS6 Chevelle.....and looking hard at the "Farmabago" exhaust" Really Kewl!!!

11 timer siden
Project Farm
Project Farm

Thanks!

10 timer siden
Matthew Harris MRHINC
Matthew Harris MRHINC

👍

11 timer siden
Project Farm
Project Farm

Thanks!

10 timer siden
Fred Seaborne
Fred Seaborne

6:40 That race wasn't fair --- he had the blue drill significantly more crooked on the screw-head than the red drill was (you can easily see how much more the blue drill is shakily wobbling as the socket is chattering over the bolt's mis-alligned hex-head), so it made it harder for the blue drill to screw the fastener in. Plus during the whole testing-session, the two drills were often too close side-by-side and thus kept bumping into each other and making their bodies be pushed outwards away from each other, further messing up the results. He should have tested and timed each drill individually, making sure that the drill was in a straight line with the fastener-shank every time.

11 timer siden
Caleb Evans
Caleb Evans

Rigid and Milwaukee

11 timer siden
Project Farm
Project Farm

Thanks for the suggestion.

10 timer siden
DAT GRAYBOI
DAT GRAYBOI

Epoxy floor comparison

11 timer siden
Project Farm
Project Farm

Great suggestion! Thank you.

10 timer siden
Chee Nou Lee
Chee Nou Lee

Awesome and detailed review as ever. I wonder how this would compete with the FRAM XGA series?

11 timer siden
Project Farm
Project Farm

Thanks! Thanks for the video idea.

10 timer siden
Atlas Atkinson
Atlas Atkinson

it all started with wanting to know what drywall hangers to use... these videos are amazing and I love the length you go for testing. Thank you so much for your time and sharing with everyone!

11 timer siden
Project Farm
Project Farm

You are welcome!

10 timer siden
Mike O
Mike O

Thanks for this video. I live in fla. And needed new wipers. Just went with the bosch icon. Thanks for the honest review and all the hard work that went into this video . Thank you.

11 timer siden
Project Farm
Project Farm

You are welcome!

10 timer siden
George Davis
George Davis

Going to get trimmer line today. Thats why I'm here

11 timer siden
Project Farm
Project Farm

Thanks for the feedback.

10 timer siden
Luke Fetzner
Luke Fetzner

Something on power tool batteries I questioned is you were using an 18v Makita to run and test with 20v batteries. Did you take into account that the amp-hour rating is at 18v volts not 20v? Also given the blower was a 20v I'm not shocked Makita did not do as well as most of the 20v. Perhaps I am just misunderstanding the test. Please keep up the good work this is the only video I have questioned and I watch a lot of your stuff. Amazing content I don't need consumer reports mag with you around.

11 timer siden
Gregory Fairchild
Gregory Fairchild

Extra air without extra fuel won't give much performance increase.

11 timer siden
Gregory Fairchild
Gregory Fairchild

Never had a Mass Air sensor failure woth a cotton filter either

9 timer siden
Gregory Fairchild
Gregory Fairchild

I've never experienced adverse effects with cotton filters like K&N. My suburban had 343,000 miles ran perfect

9 timer siden
Gregory Fairchild
Gregory Fairchild

I used to drag race in the 90s. Very in depth tests. Good information. I've ran Cotton filters for over 20 years. I love them.

9 timer siden
Gregory Fairchild
Gregory Fairchild

I'm surprised that man tenths shaved off in 0-60. Impressive!

9 timer siden
Project Farm
Project Farm

Thanks for the feedback.

10 timer siden
Jun Gleno
Jun Gleno

I'm in my mid-60s. I remember back when anything "Made in Japan" was considered junk. Times have changed.

11 timer siden
Project Farm
Project Farm

Thanks for the feedback.

9 timer siden
andre surles
andre surles

Project Farm - how about a video on metal treatments and coatings to reduce friction and improve strength? WPC treatment Cryogenic Surface Coatings Shot-pinning

11 timer siden
Project Farm
Project Farm

Thanks for the video idea.

9 timer siden
Dom Ali
Dom Ali

Thank you

11 timer siden
Project Farm
Project Farm

You're welcome!

9 timer siden
Steve Morris
Steve Morris

Milwaukie and Dewalt Speedbits all day long

11 timer siden
Project Farm
Project Farm

Thanks for watching!

9 timer siden
Robin Bot
Robin Bot

I'll be buying the Milwaukee, looks like

11 timer siden
Project Farm
Project Farm

Thanks for sharing.

9 timer siden
Kate Keough
Kate Keough

Thank you

11 timer siden
Project Farm
Project Farm

You're welcome!

9 timer siden
silent1sean
silent1sean

Great info. I would like to see a comparison of heavy duty staple guns. In particular one that will penetrate hard dense wood.

12 timer siden
Project Farm
Project Farm

Thanks for the video idea.

12 timer siden
Samuel Levitch
Samuel Levitch

Pequa. Find it at Home Depot.

12 timer siden
Project Farm
Project Farm

Thanks for the feedback.

12 timer siden
Gary H
Gary H

A Japanese power tool made in China. That's funny!

12 timer siden
adam nix
adam nix

I'd like to see some tig gloves paired against these gloves. Tillman 1414 or 1415. Cheap gloves but I'd like to see how they fair in the tests

12 timer siden
Project Farm
Project Farm

Thanks for the video idea.

12 timer siden
Aaron Sorrell
Aaron Sorrell

Seeing Michelin tires on the Suburban. :)

12 timer siden
Super Straight Preferences
Super Straight Preferences

Imagine the quality if they were Made In Taiwan... Elon Musk would be on Mars by now!

12 timer siden
Erick Fernandez
Erick Fernandez

Rigid is a beast

12 timer siden
Project Farm
Project Farm

Thanks for the feedback.

12 timer siden
7dioclau
7dioclau

13 seconds in. I'll guess no big difference!! (hoping for Japanese to win tho)

12 timer siden
Project Farm
Project Farm

Thanks for watching!

12 timer siden
Vahid Hashemi
Vahid Hashemi

Useful

12 timer siden
Project Farm
Project Farm

Glad to hear that! Thanks!

11 timer siden
finton mainz
finton mainz

Is it true that sugar in a fuel tank will cause problems?

12 timer siden
Scott
Scott

NOsection randomly recommended your channel to me a few weeks ago and I have been addicted since. I think I have watched every video and have been so impressed by your testing methods, variety, and just overall ability to have fun. Have you ever thought about testing hand tools? Hammers, wrenches, pliers, shovels, rakes, etc etc. Thanks for making these videos, they are so interesting and enjoyable!

12 timer siden
Project Farm
Project Farm

Awesome! Thank you! Thanks for the video idea.

11 timer siden
Pete Harriss
Pete Harriss

Love to see a comparison between the different brand’s halogen and LED car headlights

12 timer siden
Project Farm
Project Farm

Thanks for the video idea.

11 timer siden
Arc 247
Arc 247

Please consider finding out if there's such a thing as a good automatic wire stripper. I haven't found any that work well for me except for ones like the Southwire SA822. I've never gotten ones like the Irwin 2078300 to work well for me. I'm hoping you have better luck, and can show me a thing or two.

12 timer siden
Project Farm
Project Farm

Thanks for the video idea.

11 timer siden
Adam Vrbka
Adam Vrbka

Sorry Todd but I'll still buy American made every time 🇺🇸

12 timer siden
Project Farm
Project Farm

Thanks for the feedback.

11 timer siden